DSG 7 DQ200 TCU Repair (0AM927769K)

SKU TRA5704
  • 12 or 24-month warranty
  • Transmission Control Unit
  • Part No: 0AM 927 769 K
  • Fits Audi, Seat, Skoda, and VW models
  • Restores transmission functionality

From £299.00
Fast Turnaround 2-5 working days
Warranty Protection Covering all our repairs

Choose your service

★★★★★ “really good company , very fast repair done on a.b.s. control unit” — Anonymous

★★★★★ “Excellent service. Great company to deal with, very helpful. Would certainly use again.” — Gordon M.

★★★★★ “It’s good to have this gang on hand when it comes to gearbox electronics.” — Pawel P.

★★★★★ “Very professional , very prompt, well organised, thank you.” — Peter B.

★★★★★ “Good service on phone when ordering. Not able to say any more until part is fitted and see how it works!” — Eddie M.

★★★★★ “Had a part that was difficult to get hold of but they went the extra mile for a solution” — Johnathan M.

DSG 7 DQ200 TCU repair

24-month warranty2–5 day turnaroundTracked return deliveryRepair or replacement

Repair or replacement for the DSG 7 DQ200 TCU from Audi, Seat and Skoda models. This listing covers part number 0AM927769K.
Repair — send us your original unit, we replace the failed components on the board and return the same unit, so it keeps the coding and security data already matched to your car and needs no programming (24-month warranty).
Replacement — a brand-new unit, supplied on an exchange basis with data transfer included: send us your original unit, we copy its coding and adaptation data onto the new unit and keep yours as the exchange (12-month warranty). Both usually turn round in 2–5 working days.

Not sure the TCU is the cause? The symptoms and the fault codes we see on this unit are listed under Common Faults. If your codes differ, send them over before ordering — if the unit turns out not to be faulty you only pay the test fee and return postage.

Which vehicles does this TCU fit?

This unit is used across Audi, Seat, Skoda and Volkswagen. Check your exact model and year under Matching Vehicles, or compare the number printed on your own unit with the part numbers listed on this page. The same hardware often appears under several part numbers — call 01884 798090 if yours is not shown.

Prefer not to remove the unit yourself?

Choose the on-site option and bring the vehicle to our workshop in Uffculme, Devon. We remove, refit and road-test it before you drive away, usually the same day.

Part numbers

Part NumberPart NumberPart NumberPart Number
0CW300045N0CW300045T0CW300047S0CW300047C
0CW300045P0CW300045A0CW300045F0CW300047R
0CW300045L0CW300044D0CW300046B0CW300046P
0CW300045M0CW300044F0CW300047E0CW300046J
0CW300048A0CW300045E0CW300047T0CW300046R
0CW300046C0CW300044M0CW300044S0CW300049
0CW300047F0CW300049B0CW300044T0CW300046Q
0CW3000480CW300046A0CW300045D0CW300048T
0CW300046E0CW300047D0CW300044C0CW300047G
0CW3000450CW300049C0CW300048S

Frequently asked questions

Should I choose repair or replacement?

Repair is the usual choice: you get your own unit back with its coding intact and a longer warranty. A replacement makes sense when the unit is beyond economical repair — it is brand new, supplied on an exchange basis: your original still has to be sent in so we can transfer the data across, and it stays with us as the exchange.

How long will I be without the unit?

We aim to complete all repairs within 2–5 working days. Should a repair take longer, we will contact you with an update. It goes back to you on a tracked service. Ask about on-site fitting if you need the car back the same day.

My part number isn’t in the list — can you still help?

Usually yes. The same hardware appears under many part numbers. Send us a photo of the label or call 01884 798090 and we’ll confirm before you send anything.

What warranty do I get?

Repairs carry a 24-month warranty and replacement units 12 months. See Returns & Warranty for the full terms.

Will the warning light go out after the work?

Yes, once the unit is refitted and the stored codes are cleared, provided the fault was in this unit. If a related wiring or sensor fault is also present it has to be fixed separately — we tell you what we found.

Common Faults

What are the symptoms of a failing DSG 7 DQ200 TCU TCU?

  • Harsh, jerky or delayed gear changes
  • Gearbox dropping into limp mode, or a complete loss of drive
  • Flashing gear indicator on the instrument cluster
  • A “gearbox malfunction” warning on the dash
  • No response when selecting D or R
  • No gear engagement
  • No drive or reverse
  • EPC light illuminated
  • Main 30-amp fuse constantly blowing

Common fault codes

Fault code Meaning
U0101 Unable to communicate with the control module
CAN data bus fault
P173C Selector lever position sensor 3, implausible signal
P177F Hydraulic pump system, supply voltage too low

Seeing different codes, or not sure the TCU is the cause? Call 01884 798090 — we’ll check your codes and symptoms before you send anything.

Matching Vehicles

MakeModelYears
AudiA18X (2010-2018)
AudiA3(2008-2012), 8P (2003-2008), 8V (2012-2020)
AudiQ2(2016-present)
AudiTT8J (2007-2014)
SeatAltea(2008-2015)
SeatIbiza4th gen (2008-2017)
SeatLéon2nd gen Typ 1P (2005-2013), 3rd gen Typ 5F (2013-2020)
SeatToledo4th gen Typ NH (2012-2018)
SkodaFabia IITyp 5J (2007-2014)
SkodaFabia IIITyp NJ (2014-2021)
SkodaOctavia IITyp 1Z (2004-2013)
SkodaOctavia IIITyp 5E (2012-2020)
SkodaRapid (International)(2012-2019)
SkodaRoomster(2006-2015)
SkodaSuperb IITyp 3T (2008-2015)
SkodaYeti(2009-2017)
VolkswagenCaddy III(2010-2015)
VolkswagenGolf VIIA7 Typ 5G (2012-2020)
VolkswagenGolf V plus(2008-2014)
VolkswagenJetta VIA6 Typ 1B (2010-2018)
VolkswagenPassat V faceliftB7 (2010-2017)
VolkswagenPolo V(2009-2017)
VolkswagenScirocco III(2008-2017)
VolkswagenSharan II(2010-2022)
VolkswagenTiguan I(2007-2017)
VolkswagenTouran I facelift(2010-2015)

How It Works

  1. Place your order online — add the service you need to your basket. Before the item is added we ask for your vehicle details and fault codes, so we know exactly what we are working on.
  2. Send us your unit — replacements are supplied on an exchange basis, so we need your original unit to transfer its coding data. Prefer to program the new unit yourself? Order first and send your original afterwards.
  3. We do our part — we transfer your data to the new unit and test it, usually within 2–5 working days.
  4. Tracked return delivery — by DHL Express or DPD, ready for installation.

On-site fitting — choose the on-site option and call us to book a slot. We remove, repair and refit the unit while you wait (usually 2–3 hours) and road-test the car before you drive away.

Reviews