Mercedes-Benz 722.8 CVT TCU VGS2 Replacement Unit (A0034462410)

SKU TRA0611
  • 12-month warranty
  • Plug and play, coded to your VIN
  • Fits Mercedes A-Class and B-Class
  • Sold on exchange basis
  • Restores transmission functionality

From £449.00
Fast Turnaround 2-5 working days
Warranty Protection Covering all our repairs

In stock

★★★★★ “Any issues with abs units this is the team to sort it 👍” — Adrian B.

★★★★★ “really good company , very fast repair done on a.b.s. control unit” — Anonymous

★★★★★ “Excellent service. Great company to deal with, very helpful. Would certainly use again.” — Gordon M.

★★★★★ “It’s good to have this gang on hand when it comes to gearbox electronics.” — Pawel P.

★★★★★ “Very professional , very prompt, well organised, thank you.” — Peter B.

★★★★★ “Good service on phone when ordering. Not able to say any more until part is fitted and see how it works!” — Eddie M.

Mercedes-Benz 722.8 CVT TCU VGS2 replacement unit (A0034462410)

12-month warranty2–5 day turnaroundTracked return deliveryData transfer included

A brand-new Mercedes-Benz 722.8 CVT TCU VGS2. Listed under part number A0034462410. Supplied on an exchange basis with data transfer included: your original unit has to be sent in so we can copy its coding and adaptation data onto the new unit, and it stays with us as the exchange. Replacement units carry a 12-month warranty and normally leave us within 2–5 working days.

We need your VIN before we can ship. This unit is coded to your vehicle, so please provide the accurate VIN number when placing your order to guarantee correct programming. It is supplied on an exchange basis — your original unit has to come back to us.

This is the replacement-unit listing for part A0034462410 — prefer your own unit repaired? See the repair listing.

Not sure the TCU is the cause? The symptoms and the fault codes we see on this unit are listed under Common Faults. If your codes differ, send them over before ordering — if the unit turns out not to be faulty you only pay the test fee and return postage.

Which vehicles does this TCU fit?

This unit is used across Mercedes. Check your exact model and year under Matching Vehicles, or compare the number printed on your own unit with the part numbers listed on this page. The same hardware often appears under several part numbers — call 01884 798090 if yours is not shown.

Frequently asked questions

Do I still have to send my old unit in?

Yes. All replacement units are supplied on an exchange basis and have to be matched to your car: your original is needed for the data transfer — we copy its coding and adaptation data onto the new unit before it ships — and it stays with us as the exchange.

How long will I be without the unit?

Replacement units normally leave us within 2–5 working days of receiving your original. Should it take longer, we will contact you with an update. It comes to you on a tracked service. Ask about on-site fitting if you need the car back the same day.

My part number isn’t in the list — can you still help?

Usually yes. The same hardware appears under many part numbers. Send us a photo of the label or call 01884 798090 and we’ll confirm before you send anything.

What warranty do I get?

Replacement units carry a 12-month warranty. See Returns & Warranty for the full terms.

Will the warning light go out after the work?

Yes, once the unit is refitted and the stored codes are cleared, provided the fault was in this unit. If a related wiring or sensor fault is also present it has to be fixed separately — we tell you what we found.

Common Faults

What are the symptoms of a failing Mercedes-Benz 722.8 CVT TCU VGS2 TCU?

  • Harsh, jerky or delayed gear changes
  • Gearbox dropping into limp mode, or a complete loss of drive
  • Flashing gear indicator on the instrument cluster
  • A “gearbox malfunction” warning on the dash
  • No response when selecting D or R
  • Transmission Visit workshop warning on dash
  • Transmission can go straight into limp mode when selecting drive, slipping, loss of all drive and unable to select drive. These symptoms usually start off intermittently and become more frequent until total failure.

Common fault codes

Fault code Meaning
P1815 / 0717 The speed signal from component Y3 / 9b3 (primary speed sensor CVT) is not available
P1826 / 0722 The speed signal from component Y3 / 9b5 (output speed sensor CVT) is not available
P1939 / 0793 Speed signal from component Y3 / 9b4 (secondary speed sensor CVT) is not available
0723 The rpm signal from component Y3/9b5 CVT (output rpm sensor) is implausible
0739 The rpm signal from component Y3/9b4 CVT - secondary rpm sensor is not available
0794 Intermediate Input Shaft Speed Sensor Signal
P2198 / 0730 The gear ratio in the transmission (CVT) is not permissible
0720 Speed Gradient
1634 Component Y3 / 9n1 (CVT) is defective or the power supply is faulty (under voltage)
0896 impermissible adjustment of the step down ratio in the continuously variable automatic transmission (CVT)

Seeing different codes, or not sure the TCU is the cause? Call 01884 798090 — we’ll check your codes and symptoms before you send anything.

Matching Vehicles

MakeModelYears
MercedesA-ClassW169 (2004-2012)
MercedesB-ClassW245 (2005-2011)

How It Works

  1. Place your order online — add the service you need to your basket. Before the item is added we ask for your vehicle details and fault codes, so we know exactly what we are working on.
  2. Send us your unit — replacements are supplied on an exchange basis, so we need your original unit to transfer its coding data. Prefer to program the new unit yourself? Order first and send your original afterwards.
  3. We do our part — we transfer your data to the new unit and test it, usually within 2–5 working days.
  4. Tracked return delivery — by DHL Express or DPD, ready for installation.

On-site fitting — choose the on-site option and call us to book a slot. We remove, repair and refit the unit while you wait (usually 2–3 hours) and road-test the car before you drive away.