Toyota Yaris ABS Pump Repair ATE MK60

SKU ABS7181
  • 24-month warranty
  • ABS Model: ATE MK60 (with pressure sensor)
  • Fits Toyota Yaris (2005-2011)
  • Restores original braking performance

From £185.00
Fast Turnaround 1-3 working days
Warranty Protection Covering all our repairs

Choose your service

★★★★★ “Very professional , very prompt, well organised, thank you.” — Peter B.

★★★★★ “Good service on phone when ordering. Not able to say any more until part is fitted and see how it works!” — Eddie M.

★★★★★ “Had a part that was difficult to get hold of but they went the extra mile for a solution” — Johnathan M.

★★★★★ “Whole process of repairing my ABS module went smoothly without any issues. Staffs were friendly and professional. Will definitely use them again.” — zarif S.

★★★★★ “CU had great customer service and are very knowledgeable in what they do. Had a troublesome gear box mech which they sorted. Couldn't have been better to deal with. Highly recommend.” — Andy B.

★★★★★ “Very good service, refurbished unit worked just fine. High recommended.” — Steve R.

Toyota Yaris ABS pump repair — ATE MK60

24-month warranty1–3 day turnaroundTracked return deliveryNo coding needed

We repair the ATE MK60 ABS pump and control module fitted to the Toyota Yaris, restoring full braking and stability control. Send us your original unit: we test it, replace the failed components on the circuit board and in the pump-motor circuit, then test it again under pressure before it goes back to you — usually within 1–3 working days. You get your own unit back rather than a replacement, so it keeps the coding and security data already matched to your car — no programming or dealer visit needed. Every electronic repair carries a 24-month warranty.

Which Toyota models does this fit?

This repair covers the ATE MK60 ABS pump used in the P9 (2005-2011), Yaris. Check your exact model and year under Matching Vehicles, or compare the number printed on your unit with the part numbers listed below. Not sure? Call 01884 798090 — the same hardware is used across many models.

Is the ABS pump really the problem?

Warning lights, a hard pedal, a pump that runs constantly or fluid not reaching a wheel all point this way, and stored codes usually confirm it. The symptoms and the fault codes we see on the ATE MK60 are listed under Common Faults. If your codes differ, send them over before ordering — if the unit turns out not to be faulty you only pay the test fee and postage.

Prefer not to remove the unit yourself?

Choose the on-site option and bring the vehicle to our workshop in Uffculme, Devon. We remove, repair and refit the unit, then road-test the car before you drive away — usually in 2–3 hours.

Frequently asked questions

Will the ABS light go out after the repair?

Yes, once the repaired unit is refitted and the stored codes are cleared, provided the fault was in the pump or module. If a wheel-speed sensor or wiring fault is also present, that has to be fixed separately — we tell you what we found with every repair.

Does the unit need coding or programming afterwards?

No. This is a repair, not an exchange — you get your original unit back, so it keeps the coding, VIN and security data already matched to your car. Refit it and clear the stored fault codes with a diagnostic tool. If brake lines were opened while removing the unit, the system also needs an ABS bleed with that tool.

How long will I be without the unit?

We repair within 1–3 working days of receiving it and return it tracked with DHL Express or DPD. Ask about on-site fitting if you need the car back the same day.

My part number isn’t in the list — can you still help?

Usually yes. The same ABS hardware appears under many part numbers. Send us a photo of the label or call 01884 798090 and we’ll confirm before you send anything.

What warranty do I get?

All electronic repairs carry a 24-month warranty. See Returns & warranty for the full terms.

What customers say

★★★★★

Sent my Bosch ABS unit to ControlUnits for repair. Picked up on Friday and returned by Wednesday. Really quick service. Can’t fault them, well pleased and would definitely recommend.

Leon — Verified customer

★★★★★

A really efficient service with feedback on my wrecked ABS pump thanks to water damage. Quickly sorted out a recon unit which arrived the next day.

Daniel — Verified customer

See all reviews on Google or on our REVIEWS.io profile — rated 4.9/5 from 400+ verified customers.

Find your part number

If your number is not listed below, or you need help identifying it, call 01884 798090.

Part numberPart numberPart numberPart number
Toyota 44540-0D04006.2102-1205.406.2109-5617.3
Toyota44540-0D01106.2102-0747.406.2109-0319.3
Toyota44540-0D11006.2102-1753.406.2109-5856.3
Toyota44540-0D04006.2102-1205.406.2109-5617.3
Toyota44540-0D01006.2102-0107.406.2102-0167.4

Common Faults

What are the symptoms of a failing ATE MK60 ABS pump?

  • ABS, traction-control or brake warning lights staying on
  • Hard brake pedal, or the pedal sinking under braking
  • Pump motor running constantly, or not running at all
  • Brake fluid not reaching one or more wheels
  • Speedometer or cruise control dropping out alongside the ABS light
  • Toyota - C1246 - Master Cylinder Pressure Sensor Malfunction

Seeing different codes, or not sure the ABS pump is the cause? Call 01884 798090 — we’ll check your codes and symptoms before you send anything.

Matching Vehicles

MakeModelYears
ToyotaYarisP9 (2005-2011)

How It Works

  1. Place your order online — add the service you need to your basket. Before the item is added we ask for your vehicle details and fault codes, so we know exactly what we are working on.
  2. Send us your unit — securely packed, or ask us to arrange a collection (UK only).
  3. We do our part — we test your unit first, then repair it, usually within 1–3 working days. If it turns out not to be faulty, you pay only the test fee and postage.
  4. Tracked return delivery — by DHL Express or DPD, with payment taken once the work is complete.

On-site fitting — choose the on-site option and call us to book a slot. We remove, repair and refit the unit while you wait (usually 2–3 hours) and road-test the car before you drive away.