Mercedes-Benz 7G-Tronic 722.9 TCU Repair VGS (A0335456732)
- 24-month warranty
- Transmission Control Unit
- Part No: A 033 545 67 32
- Fits Mercedes-Benz models
- Restores transmission functionality
★★★★★ “Thank you for the fast service turnaround.” — Alan J.
★★★★★ “Great turn around. Repair work perfectly,saved a lot of money compared to a new unit,will definitely use this company again.can only give 5 stars ,deserves a lot more” — Robbie J.
★★★★★ “I highly recommend this company; they quickly repaired the gear selector in my Mercedes W211.” — Piotr P.
★★★★★ “Flawless from start to finish.Diagnosed correctly and refitted module and bingo no issues” — Mike C.
★★★★★ “Sent a unit to be repaired, checked over and found no faults only charged me for checking and not making up faults which is seriously excellent. Top company and highly recommended” — stephen E.
★★★★★ “Fantastic service. Turned around in two days, fixed and cleaned. Would highly recommend” — Anonymous
Mercedes-Benz 7G-Tronic 722.9 TCU VGS repair
We repair the Mercedes-Benz 7G-Tronic 722.9 TCU VGS. Listed under part number A0335456732. Send us your original unit, we replace the failed components on the board and return the same unit, so it keeps the coding and security data already matched to your car and needs no programming (24-month warranty). Repairs usually turn round in 2–5 working days.
Prefer it fitted? Choose Repair & Fitting and call 01884 798090 to book a slot at our workshop in Uffculme, Devon — we remove the unit, repair it, refit it and road-test the car, usually the same day.
Not sure the TCU is the cause? The symptoms and the fault codes we see on this unit are listed under Common Faults. If your codes differ, send them over before ordering — if the unit turns out not to be faulty you only pay the test fee and return postage.
Which vehicles does this TCU fit?
This unit is used across Mercedes. Check your exact model and year under Matching Vehicles, or compare the number printed on your own unit with the part numbers listed on this page. The same hardware often appears under several part numbers — call 01884 798090 if yours is not shown.
Prefer not to remove the unit yourself?
Choose Repair & Fitting and call 01884 798090 to book a slot at our workshop in Uffculme, Devon. We remove the unit, repair it and refit it, then road-test the car before you drive away, usually the same day.
Frequently asked questions
Do I get my own unit back?
Yes. This is a repair, not an exchange — we repair and return your original unit, so it keeps the coding and security data already matched to your car and needs no programming afterwards.
How long will I be without the unit?
We aim to complete all repairs within 2–5 working days. Should a repair take longer, we will contact you with an update. It goes back to you on a tracked service. Ask about on-site fitting if you need the car back the same day.
My part number isn’t in the list — can you still help?
Usually yes. The same hardware appears under many part numbers. Send us a photo of the label or call 01884 798090 and we’ll confirm before you send anything.
What warranty do I get?
Repairs carry a 24-month warranty. See Returns & Warranty for the full terms.
Will the warning light go out after the work?
Yes, once the unit is refitted and the stored codes are cleared, provided the fault was in this unit. If a related wiring or sensor fault is also present it has to be fixed separately — we tell you what we found.
Common Faults
What are the symptoms of a failing Mercedes-Benz 7G-Tronic 722.9 TCU VGS TCU?
- Harsh, jerky or delayed gear changes
- Gearbox dropping into limp mode, or a complete loss of drive
- Flashing gear indicator on the instrument cluster
- A “gearbox malfunction” warning on the dash
- No response when selecting D or R
- Gearbox goes into limp home mode
- Stuck in gear or holding in gear, unable to select any gear
- Intermittently not changing gear
Common fault codes
| Fault code | Meaning |
|---|---|
| P0715 | Input/Turbine Speed Sensor Circuit Malfunction |
| P0716 | Input / Turbine Speed Sensor Circuit Malfunction / Range Performance / No Signal / Intermittent |
| P0717 | Input / Turbine Speed Sensor Circuit No Signal |
| P0718 | Input / Turbine Speed Sensor Circuit Intermittent |
| P0717 | 2204 – The signal from component Y3 / 8n1 (turbine speed sensor (VGS) is unavailable |
| P0718 | 2205 – The component Y3 / 8n1 (turbine speed sensor (VGS) is defective |
| P0719 | Torque Converter Brake Switch Circuit Low |
| P0720 | Output Speed Sensor Circuit Malfunction |
| P0721 | Output Speed Sensor Range/Performance |
| P0722 | Output Speed Sensor No Signal |
| P0723 | Output Speed Sensor Intermittent |
| P2766 | Input / Turbine Speed Sensor Y3/8n2 Circuit Range / Performance |
| P2767 | The signal from component Y3 / 8n2 (Internal speed sensor (VGS) is unavailable |
| P2768 | The component Y3 / 8n2 (Internal speed sensor (VGS) is defective |
| 2201 | the component Y3/8n2 (internal speed sensor) |
| P0705 | Transmission range sensor fault |
Different symptoms or fault codes – or no codes at all? Call 01884 798090 or use our contact form. We’ll help assess the issue before you send your unit.
Contact usMatching Vehicles
| Make | Model | Years |
|---|---|---|
| Mercedes | C-Class | W203 (2000-2008)W204 (2007-2015) |
| Mercedes | CL-Class | W216 (2006-2014) |
| Mercedes | CLK-Class | W209 (2002-2010) |
| Mercedes | CLS-Class | W219 (2004-2010) |
| Mercedes | E-Class | W211 (2002-2010)W212 (2009-2017) |
| Mercedes | GL-Class | X164 (2006-2012)X166 (2012-2015) |
| Mercedes | M-Class | W164 (2005-2011)W166 (2011-2015) |
| Mercedes | R-Class | W251 (2005-2013) |
| Mercedes | S-Class | W221 (2005-2013) |
| Mercedes | SL-Class | R230 (2001-2012) |
| Mercedes | SLK | R171 (2004-2011)R172 (2011-2016) |
| Mercedes | Sprinter | 2nd gen (2006-2018) |
| Mercedes | Viano | W639 (2003-2014) |
How It Works
-
Step 1
Order online
Add the service to your basket. We ask for your vehicle details and fault codes – no separate repair form.
-
Step 2
Send us your unit
Pack it securely and post it with the free UK shipping label – or ask us to arrange a collection.
-
Step 3
We test & repair
Every unit is tested first, then repaired within 2–5 working days. Not faulty? You only pay the test fee and postage.
-
Step 4
Back to you, tracked
Returned by DHL Express or DPD. Pay at checkout or choose Pay After Repair.
Prefer on-site fitting?
Bring the vehicle to our workshop in Uffculme, Devon. We remove, repair and refit the unit while you wait (about 2–3 hours), road-test the car and you pay on collection.
More details: How to order Delivery pricing Returns & warranty
