Welcome to ControlUnits.com - Electronics Remanufactured - #1 Automotive Centre in the UK -
Welcome to ControlUnits.com - Electronics Remanufactured - #1 Automotive Centre in the UK -
In stock
★★★★★ “It’s good to have this gang on hand when it comes to gearbox electronics.” — Pawel P.
★★★★★ “Very professional , very prompt, well organised, thank you.” — Peter B.
★★★★★ “Good service on phone when ordering. Not able to say any more until part is fitted and see how it works!” — Eddie M.
★★★★★ “Had a part that was difficult to get hold of but they went the extra mile for a solution” — Johnathan M.
★★★★★ “Whole process of repairing my ABS module went smoothly without any issues. Staffs were friendly and professional. Will definitely use them again.” — zarif S.
★★★★★ “CU had great customer service and are very knowledgeable in what they do. Had a troublesome gear box mech which they sorted. Couldn't have been better to deal with. Highly recommend.” — Andy B.
A brand-new transmission control unit for the Mercedes-Benz 722.6 (5G-Tronic) gearbox, replacing part number A 140 270 11 61. It arrives plug-and-play: no coding, no programming and no data transfer — fit it and drive, which makes it a straightforward job for a workshop and realistic for a competent DIY fitter. Every unit is tested before dispatch, dispatched within 2–5 working days and covered by a 12-month warranty.
Not sure the TCU is the cause? The symptoms and the fault codes we see on the 722.6 are listed under Common Faults. Speed-sensor codes in particular can point either at the control unit or at the conductor plate inside the gearbox — if your codes differ, send them over before ordering.
The 722.6 was fitted across most of the Mercedes range, from the C-Class, E-Class and S-Class through the CLK, M-Class and SL to the Sprinter, Vito and Viano vans. Check your exact model and year under Matching Vehicles, or compare the number printed on your own unit with the part number above.
No. This 722.6 TCU is supplied plug-and-play: fit it, and the gearbox works without a dealer visit or a coding session. That is what separates it from most replacement control units, which have to be matched to the car before they will run.
No. Because no data has to be transferred across, you can order the new unit and fit it straight away. Keep your old one until the car is running properly, then dispose of it as you see fit.
Compare the number on your own unit with A 140 270 11 61, and check your model and year under Matching Vehicles. The same 722.6 hardware appears under several numbers — send us a photo of the label or call 01884 798090 and we’ll confirm before you order.
Brand new, not a rebuilt unit. It is tested before dispatch and carries a 12-month warranty. See Returns & Warranty for the full terms.
A TCU fault and a mechanical fault can look identical from the driver’s seat. If the symptoms remain, the cause is usually in the valve body, the conductor plate or the speed sensors rather than the control unit. Call us with the stored codes and we’ll tell you what we see on these boxes.
| Fault code | Meaning |
|---|---|
| 13 | Speed sensor N3 |
| 109 | Speed sensor N3 |
| 0717 | No signal from Y3/8n1 (turbine speed sensor, VGS) |
| 2767 | No signal from Y3/8n2 (internal speed sensor, VGS) |
| P2200 | Y3/6n2 speed sensor 2 faulty |
| P2203 | Y3/6n3 speed sensor 3 faulty |
Speed-sensor codes can point at the control unit or at the conductor plate inside the gearbox. Seeing different codes? Call 01884 798090 — we’ll check them before you order.
| Make | Model | Years |
|---|---|---|
| Mercedes | C-Class | W203 (2000-2008), W204 (2007-2015) |
| Mercedes | CLK-Class | W209 (2002-2010) |
| Mercedes | E-Class | W211 (2002-2010) |
| Mercedes | M-Class | W164 (2005-2011) |
| Mercedes | S-Class | W221 (2005-2013) |
| Mercedes | SL-Class | R230 (2001-2012) |
| Mercedes | Sprinter | 2nd gen (2006-2018) |
| Mercedes | Viano | W639 (2003-2014) |
| Mercedes | Vito | W639 (2003-2014) |
Need to know more? Call 01884 798090 or see How to order · Delivery pricing · Returns & warranty.
No account yet?
Create an Account
🎅 Please note that we will be closed from December 24nd to January 4th. Any orders placed during this period will be processed starting on Monday, January 5th.
📧 If you have any enquiries during this time, please contact us by email at [email protected]
🎁 Warm regards - The ControlUnits Team 🚗🔧
Customers within the UK can schedule a pickup by placing an order on our website, calling 01884 798090, or emailing [email protected]. Advance booking is required to ensure timely service.