DSG 7 DQ200 Valve Body Replacement (0AM325025H)
- 12-month warranty
- Valve Body / Hydraulic Block
- Part No: 0AM 325 025 H
- Fits Audi, Seat, Skoda, and VW models
- Brand-new unit, with or without exchange
★★★★★ “Thank you for the fast service turnaround.” — Alan J.
★★★★★ “Great turn around. Repair work perfectly,saved a lot of money compared to a new unit,will definitely use this company again.can only give 5 stars ,deserves a lot more” — Robbie J.
★★★★★ “I highly recommend this company; they quickly repaired the gear selector in my Mercedes W211.” — Piotr P.
★★★★★ “Flawless from start to finish.Diagnosed correctly and refitted module and bingo no issues” — Mike C.
★★★★★ “Sent a unit to be repaired, checked over and found no faults only charged me for checking and not making up faults which is seriously excellent. Top company and highly recommended” — stephen E.
★★★★★ “Fantastic service. Turned around in two days, fixed and cleaned. Would highly recommend” — Anonymous
DSG 7 DQ200 Valve Body replacement
We supply the DSG 7 DQ200 Valve Body fitted to Audi, Seat and Skoda models as a brand-new unit, on an exchange basis or bought outright. Listed under part number 0AM325025H.
Replacement (exchange) — a brand-new unit with data transfer included: send us your original, we copy its coding and adaptation data onto the new unit so it goes in without programming, and yours stays with us as the exchange. Usually turned round in 2–5 working days (12-month warranty).
Replacement (no exchange) — the same brand-new unit bought outright. Keep your old one, nothing to send back. It is supplied without your vehicle’s data, so it needs coding and adaptation with a diagnostic tool after fitting (12-month warranty).
Replacement & fitting — bring the car to our workshop in Uffculme, Devon, and we fit and set up the new unit while you wait.
Not sure the valve body is the cause? The symptoms and the fault codes we see on this unit are listed under Common Faults. If your codes differ, send them over before ordering and we will confirm the valve body is the right part to replace.
Which vehicles does this valve body fit?
This unit is used across Audi, Seat, Skoda and Volkswagen. Check your exact model and year under Matching Vehicles, or compare the number printed on your own unit with the part numbers listed on this page. The same hardware often appears under several part numbers — call 01884 798090 if yours is not shown.
Prefer not to fit the unit yourself?
Choose Replacement & Fitting and bring the vehicle to our workshop in Uffculme, Devon. We remove the old unit, fit and set up the replacement and road-test the car before you drive away, usually the same day.
Frequently asked questions
Exchange or no exchange — which should I choose?
Exchange is the usual choice: send us your original unit and we transfer its coding and adaptation data onto the new one, so it goes in without programming, and the old unit stays with us. Choose no exchange if you want to keep your old unit or cannot send it in. The price is higher because nothing comes back to us, and the unit has to be coded and adapted with a diagnostic tool after fitting.
How long does an exchange take?
We aim to transfer the data and dispatch the replacement within 2–5 working days of your original unit arriving. Should it take longer, we will contact you with an update. It goes out on a tracked service. If you cannot be without the car, choose the no-exchange option or on-site fitting.
My part number isn’t in the list — can you still help?
Usually yes. The same hardware appears under many part numbers. Send us a photo of the label or call 01884 798090 and we’ll confirm before you order.
What warranty do I get?
All replacement units carry a 12-month warranty, with or without exchange. See Returns & Warranty for the full terms.
Does it need setting up after fitting?
Yes — basic settings and clutch adaptation have to be carried out with a diagnostic tool once the unit is in the car. Fresh transmission fluid and a filter are strongly recommended at the same time.
Common Faults
What are the symptoms of a failing DSG 7 DQ200 Valve Body valve body?
- Slipping between specific gears
- Flaring on upshifts
- Pressure-regulation fault codes
- Delayed engagement when selecting D or R
- Contaminated fluid after a long service interval
- No gear engagement
- No drive or reverse
- EPC light illuminated
- Main 30-amp fuse constantly blowing
Common fault codes
| Fault code | Meaning |
|---|---|
| P17BF | Hydraulic pump system, overload protection |
| P189C / P1895 | Pressure build-up faulty |
| P0841 / 17225 | Hydraulic pressure sensor 1, implausible signal |
| P175D00 | Clutch 1 closes or opens unintentionally |
| P176E00 | Clutch 2 closes or opens unintentionally |
Different symptoms or fault codes – or no codes at all? Call 01884 798090 or use our contact form. We’ll help assess the issue before you send your unit.
Contact usMatching Vehicles
| Make | Model | Years |
|---|---|---|
| Audi | A1 | 8X (2010-2018) |
| Audi | A3 | (2008-2012)8P (2003-2008)8V (2012-2020) |
| Audi | Q2 | (2016-present) |
| Audi | TT | 8J (2007-2014) |
| Seat | Altea | (2008-2015) |
| Seat | Ibiza | 4th gen (2008-2017) |
| Seat | Léon | 2nd gen Typ 1P (2005-2013)3rd gen Typ 5F (2013-2020) |
| Seat | Toledo | 4th gen Typ NH (2012-2018) |
| Skoda | Fabia II | Typ 5J (2007-2014) |
| Skoda | Fabia III | Typ NJ (2014-2021) |
| Skoda | Octavia II | Typ 1Z (2004-2013) |
| Skoda | Octavia III | Typ 5E (2012-2020) |
| Skoda | Rapid (International) | (2012-2019) |
| Skoda | Roomster | (2006-2015) |
| Skoda | Superb II | Typ 3T (2008-2015) |
| Skoda | Yeti | (2009-2017) |
| Volkswagen | Caddy III | (2010-2015) |
| Volkswagen | Golf VII | A7 Typ 5G (2012-2020) |
| Volkswagen | Golf V plus | (2008-2014) |
| Volkswagen | Jetta VI | A6 Typ 1B (2010-2018) |
| Volkswagen | Passat V facelift | B7 (2010-2017) |
| Volkswagen | Polo V | (2009-2017) |
| Volkswagen | Scirocco III | (2008-2017) |
| Volkswagen | Sharan II | (2010-2022) |
| Volkswagen | Tiguan I | (2007-2017) |
| Volkswagen | Touran I facelift | (2010-2015) |
How It Works
-
Step 1
Order online
Add the service to your basket. We ask for your vehicle details and fault codes – no separate repair form.
-
Step 2
Send us your unit
Pack it securely and post it with the free UK shipping label – or ask us to arrange a collection.
-
Step 3
We test & repair
Every unit is tested first, then repaired within 2–5 working days. Not faulty? You only pay the test fee and postage.
-
Step 4
Back to you, tracked
Returned by DHL Express or DPD. Pay at checkout or choose Pay After Repair.
Prefer on-site fitting?
Bring the vehicle to our workshop in Uffculme, Devon. We remove, repair and refit the unit while you wait (about 2–3 hours), road-test the car and you pay on collection.
More details: How to order Delivery pricing Returns & warranty
