Mercedes-Benz 5G-Tronic Tcu 722.6 Replacement Unit (NEW)
- 12-month warranty
- New (TCU) Replacement
- Plug’n’Play – No coding required
- Mercedes Part No: A 140 270 11 61
- Fits Mercedes-Bens models
In stock
★★★★★ “Thank you for the fast service turnaround.” — Alan J.
★★★★★ “Great turn around. Repair work perfectly,saved a lot of money compared to a new unit,will definitely use this company again.can only give 5 stars ,deserves a lot more” — Robbie J.
★★★★★ “I highly recommend this company; they quickly repaired the gear selector in my Mercedes W211.” — Piotr P.
★★★★★ “Flawless from start to finish.Diagnosed correctly and refitted module and bingo no issues” — Mike C.
★★★★★ “Sent a unit to be repaired, checked over and found no faults only charged me for checking and not making up faults which is seriously excellent. Top company and highly recommended” — stephen E.
★★★★★ “Fantastic service. Turned around in two days, fixed and cleaned. Would highly recommend” — Anonymous
Mercedes-Benz 5G-Tronic 722.6 TCU — new replacement unit
A brand-new transmission control unit for the Mercedes-Benz 722.6 (5G-Tronic) gearbox, replacing part number A 140 270 11 61. It arrives plug-and-play: no coding, no programming and no data transfer — fit it and drive, which makes it a straightforward job for a workshop and realistic for a competent DIY fitter. Every unit is tested before dispatch, dispatched within 2–5 working days and covered by a 12-month warranty.
Not sure the TCU is the cause? The symptoms and the fault codes we see on the 722.6 are listed under Common Faults. Speed-sensor codes in particular can point either at the control unit or at the conductor plate inside the gearbox — if your codes differ, send them over before ordering.
Which vehicles does this 722.6 TCU fit?
The 722.6 was fitted across most of the Mercedes range, from the C-Class, E-Class and S-Class through the CLK, M-Class and SL to the Sprinter, Vito and Viano vans. Check your exact model and year under Matching Vehicles, or compare the number printed on your own unit with the part number above.
Frequently asked questions
Does this unit need coding or programming?
No. This 722.6 TCU is supplied plug-and-play: fit it, and the gearbox works without a dealer visit or a coding session. That is what separates it from most replacement control units, which have to be matched to the car before they will run.
Do I have to send my old unit in?
No. Because no data has to be transferred across, you can order the new unit and fit it straight away. Keep your old one until the car is running properly, then dispose of it as you see fit.
How do I know this is the right part for my car?
Compare the number on your own unit with A 140 270 11 61, and check your model and year under Matching Vehicles. The same 722.6 hardware appears under several numbers — send us a photo of the label or call 01884 798090 and we’ll confirm before you order.
Is it new or refurbished?
Brand new, not a rebuilt unit. It is tested before dispatch and carries a 12-month warranty. See Returns & Warranty for the full terms.
The gearbox still misbehaves after fitting — what now?
A TCU fault and a mechanical fault can look identical from the driver’s seat. If the symptoms remain, the cause is usually in the valve body, the conductor plate or the speed sensors rather than the control unit. Call us with the stored codes and we’ll tell you what we see on these boxes.
Common Faults
What are the symptoms of a failing 722.6 TCU?
- Harsh, jerky or delayed gear changes
- Gearbox dropping into limp mode, or a complete loss of drive
- No response when selecting D or R
- A “gearbox malfunction” warning on the dash
- Speed-sensor codes stored against the transmission
Common fault codes
| Fault code | Meaning |
|---|---|
| 13 | Speed sensor N3 |
| 109 | Speed sensor N3 |
| 0717 | No signal from Y3/8n1 (turbine speed sensor, VGS) |
| 2767 | No signal from Y3/8n2 (internal speed sensor, VGS) |
| P2200 | Y3/6n2 speed sensor 2 faulty |
| P2203 | Y3/6n3 speed sensor 3 faulty |
Different symptoms or fault codes – or no codes at all? Call 01884 798090 or use our contact form. We’ll help assess the issue before you send your unit.
Contact usMatching Vehicles
| Make | Model | Years |
|---|---|---|
| Mercedes | C-Class | W203 (2000-2008)W204 (2007-2015) |
| Mercedes | CLK-Class | W209 (2002-2010) |
| Mercedes | E-Class | W211 (2002-2010) |
| Mercedes | M-Class | W164 (2005-2011) |
| Mercedes | S-Class | W221 (2005-2013) |
| Mercedes | SL-Class | R230 (2001-2012) |
| Mercedes | Sprinter | 2nd gen (2006-2018) |
| Mercedes | Viano | W639 (2003-2014) |
| Mercedes | Vito | W639 (2003-2014) |
How It Works
-
Step 1
Order online
Add the new unit to your basket. No need to send your old one – just check the part number matches first.
-
Step 2
Tested before dispatch
Every unit is tested before it leaves us, usually within 2–5 working days.
-
Step 3
Packed & shipped
Securely packed and sent on a tracked service by DHL Express or DPD.
-
Step 4
Fit and drive
Plug and play: no coding, no programming, no data transfer. Keep your old unit until the car runs properly.
More details: How to order Delivery pricing Returns & warranty
